SearchFind my scanner
Best picksReviewsCompareCasesApplicationsGuidesVideosSearch the siteFind my scannerAbout us

Source-verified head-to-head

CR-Scan Raptor vs Sermoon S1

Which one should you buy? Start with the job and capture workflow, then use the specification table to confirm the fit. No hands-on test is claimed.

Creality CR-Scan Raptor — image from Creality official storeImage: Creality official store ↗Creality
Mechanical parts and edges
VS
Creality Sermoon S1 — image from Creality official storeImage: Creality official store ↗Creality
Professional multi-mode scanning
CHOOSE CR-SCAN RAPTOR FOR

Mechanical parts and edges

The stronger pick over Pika when fine mechanical detail matters more than portability or wireless convenience.

Check latest priceDirect link to Creality; no affiliate tracking is active.Read the full CR-Scan Raptor review →
OR
CHOOSE SERMOON S1 FOR

Professional multi-mode scanning

The professional upgrade in this set for teams that need several optical modes across parts, deep features and larger assemblies.

Check latest priceDirect link to Creality; no affiliate tracking is active.Read the full Sermoon S1 review →

Decision matrix

Which workflow favors which scanner?

Compare another pair →
Claimed accuracy figureSame listed figure

Compares manufacturer claims only. Optical modes and test conditions may differ; this is not a measured performance winner.

Small objectsCR-Scan Raptor

Match the minimum object size and close-range capture mode.

Large objectsSermoon S1

Wide-area tracking and working distance matter more here.

Reverse engineeringBoth qualify

Prioritizes edges, surface adaptability and part workflow.

3D printingNo clear fit

Both capture quality and mesh cleanup determine usefulness.

Portable workflowNo clear fit

Standalone processing or wireless capture reduces field equipment.

Lower recorded priceNot comparable

At least one price is unverified or quote-only. Confirm both current checkout totals before comparing.

Operating evidence

Watch, inspect and follow the workflow

Continue from the buying decision into original YouTube evidence, documented cases and source-linked operating instructions.

CR-Scan Raptor · Independent reviewCreality CR-Scan Raptor tested across 16 scans

A long-form stress test of laser and NIR capture across multiple objects, useful for seeing tracking behavior and the gap between specifications and operating reality

Watch with evidence notes →CR-Scan Raptor · User caseSixteen real scans with the Creality Raptor

An independent creator uses both Raptor capture systems across 16 scans, giving buyers more evidence than a single polished sample

Read the documented case →CR-Scan Raptor · Beginner tutorialHow to calibrate the Creality Raptor

Follow the official calibration sequence, then verify the scanner before a tolerance-sensitive job

Follow the operating guide →Sermoon S1 · Independent reviewSermoon S1 scan-mode and measurement comparison

A 57-minute same-object comparison covering S1 cross, parallel and single-line laser modes, black and large objects, NIR, turntable capture and measurements

Watch with evidence notes →Sermoon S1 · Scan result caseSermoon S1 scanbench mode comparison

The same test objects are scanned with cross, parallel, single-line and NIR modes before a measurement section compares Sermoon S1 with MetroY Pro

Read the documented case →Sermoon S1 · Intermediate tutorialChoose the right Sermoon S1 scanning mode

Use object geometry and surface behavior to choose cross, parallel, single-line laser or NIR before starting a production scan

Follow the operating guide →

Manufacturer specifications

Side-by-side

FeatureCR-Scan RaptorSermoon S1
Price guideTypical list price around $1,299Professional tier; check current quote
Claimed accuracyUp to 0.02 mm (laser)Up to 0.02 mm
Claimed resolution0.02–2 mm0.05–2 mm
Claimed scan speedUp to 60 fpsUp to 90 fps
Claimed working distance150–1000 mm150–1200 mm
Claimed object range5 mm to 2,000 mm objects5 mm to 4,000 mm objects
Claimed light source7-line blue laser + NIR1 + 7 + 34 blue lasers + NIR
Claimed markerlessYesYes
Claimed wirelessNoNo
Claimed standaloneNoNo
Claimed weight372 g508 g
Claimed systemsWindows, macOSWindows, macOS; mobile with accessory
Claimed exportsSTL, OBJ, PLYSTL, OBJ, PLY

Specifications are manufacturer claims checked against the sources above. Optical modes and test conditions may differ, so similar-looking numbers are not automatically equivalent.

Best fit

CR-Scan Raptor

Reverse EngineeringCar PartsSmall Objects

The stronger pick over Pika when fine mechanical detail matters more than portability or wireless convenience.

MAIN LIMITATIONCable-free field scanning

Best fit

Sermoon S1

Reverse EngineeringCar PartsLarge Objects

The professional upgrade in this set for teams that need several optical modes across parts, deep features and larger assemblies.

MAIN LIMITATIONCasual hobby use

Requirements check

Need a decision on your actual object?

Share the material, size, required output, budget and purchase timeline. We will respond with a source-linked shortlist and the main workflow risks.

Get a requirements-based shortlist

Questions answered

Before you choose

Should I buy CR-Scan Raptor or Sermoon S1?

Choose CR-Scan Raptor when mechanical parts and edges matters most. Choose Sermoon S1 when professional multi-mode scanning is the priority.

Does the lower accuracy number guarantee a better scan?

No. Optical mode, object surface, tracking, calibration and scan technique can matter more than a best-case single-frame number.